Beam iridium SatDOCK 9555 User Manual download pdf (Page 15)

SatDOCK 9555 Installation & User Manual

InstallationGuidelines

This guide outlines the process for installing the Beam

SatDOCK 9555 in conjunction with an Iridium 9555 portable

handset.

This kit must not be used with any other device other than the

Iridium 9555 handset.

◊ Only qualied personnel should install communication

equipment. If necessary, contact the vehicle manufacturer

for air bag information specic to the vehicle.

◊ Ensure that the units are protected from dirt and moisture.

◊ Select an area to mount components that do not interfere

with driver or passengers seating or leg space.

◊ Ensure that each mounting surface is strong enough to

support the component being mounted to prevent the

component from loosening over time.

◊ Mount all components securely to prevent shifting that

could cause injury or could interfere with safe vehicle

operation. Always use the supplied mounting hardware.

◊ Leave space around the units to allow cooling and ensure

there are adequate clearance for cables.

◊ Ensure the units can be easily removed.

Routing Cables (for vehicle installations)

If your vehicle is equipped with wiring troughs in the doorsills,

use them to simplify cable installation and to provide maximum

protection for the cables.

If wiring troughs are not available, route cables according to

these guidelines:

◊ Route cables so they are protected from pinching, sharp

edges, and crushing

◊ Where possible, avoid routing cables above the catalytic

converter

◊ Use grommets wherever a cable must pass through a

hole in a metal panel

WARNING:

Air bags inate with great force. DO NOT place objects,

including communication equipment, in the area over

the air bag or in the air bag deployment area. If the

communication equipment is improperly installed and

the air bag inates, serious injury could result.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

Beam iridium SatDOCK 9555 User Manual Page 15